1 Tonne Tracked Dumper
Put away that barrow
For those hard to reach applications and when small is better, our 1 tonne capacity high tip dumper is perfect with a width of 750mm.
Walk behind or ride on the footplate for those longer distances. Loads a standard 8T skip.
Match it with the 1.0T excavator and never use a wheelbarrow again!
Perfect for cutting down on people and complying with the physical distancing regulations...
See our Dumper action by clicking HERE
The Slanetrac HT 1000 Diesel Track Dumper is hydraulically driven and comes with braked drive motors.
This compact Track Dumper has a maximum width of 750mm and a length of 1900mm.It can turn on its own length offering greater accessibility and maneuverability in urban areas or areas where larger plant can’t gain access.
Complete with hi tipping capacity; the Slanetrac HT1000 Diesel Track Dumper offers a tipping height of 1300mm, and easily tips into skips.
With a very low ground pressure and rubber tracks, the Slanetrac HT1000 offers minimum ground damage, while excellent gradability and stability ensure safe operating of the dumper.
Powered by a Kohler KDW702 16.5hp (12.3kw) electric start, water cooled engine; this robustly built Track Dumper has a load capacity of 1 ton. Complete with hi tipping capacity the Slanetrac HT1000 offers a tipping height of 1300mm and easily tips into skips. With a very low ground pressure and rubber tracks the Slanetrac HT1000 offers minimum ground damage while excellent gradability and stability ensure safe operating of the dumper.
1.0T Tracked dumper
Key Information
Power
Honda Petrol
Fuel Tank
6.0L
Load Capacity
1 Tone
Unladen Weigh
770kg
Laden Weigh
1770kg
Automatic Engine Roll Over
Cut Out
Safety Equipment
